Subscribe to this list via RSS Blog posts tagged in Fiber Optic Attenuator
2516

Understanding Polarity in MPO System

 

MPO/MTP technology has led to the adoption of 40/100GbE, however on of its challenges is with regards to  proper polarity of these array connections.  Maintaining  the correct polarity across a fiber network enables signals  from any type of active equipment to be  directed to the receive port of a second piece of active equipment – and vice versa. To ensure the MPO/MTP systems work with correct polarity, the TIA 568 standard suggests several methods.

 

MPO Connector

First on the list is the  MPO connector usually consisting of  12 fibers. 24 fibers, 36 fibers and 72 fibers  Each MTP connector has a key on one of the flat side added by the body. When the key sits on the bottom, this is called key down. When the key sits on top, this is referred to as the key up position.  In this orientation, each of the fiber holes in the connector is numbered in sequence from left to right and is referred as fiber position. The orientation of this key also determines the MPO cable’s polarity.

Three Cables for Three Polarization Methods

The three methods for proper polarity defined by TIA 568 standard are named as Method A, Method B and Method C. To match these standards, three type of MPO truck cables with different structures named Type A, Type B and Type C are being used for the three different connectivity methods respectively. In this part, the three different cables will be introduced firstly and then the three connectivity methods.

MPO Trunk Cable Type A: Type A cable is also known as straight cable, is a straight through cable with a key up MPO connector on one end and a key down MPO connector on the opposite end. This makes the fibers at each end of the cable have the same fiber position.

 

The issue of polarity with MPO cables can be easily addressed by selecting the correct type of MPO cables, connectors, cassettes and patch cables. Various  polarity settings/methods can be applied  to satisfy the requirements of the 40G environment.  

 

 

 

The issue of polarity with MPO cables can be easily addressed by selecting the correct type of MPO cables, connectors, cassettes and patch cables. Various  polarity settings/methods can be applied  to satisfy the requirements of the 40G environment.  

 

Last modified on Continue reading
0
2297

Fiber optic connectors have traditionally been the biggest concern in using fiber optic systems. While connectors were once unwieldy and difficult to use, connector manufacturers have standardized and simplified connectors greatly. This increases the user use convenient increase in the use of optical fiber systems; It is also emphasizing taken proper care of and deal with the optical connector. This article covers connector basics including the parts of a fiber optic connector, installing fiber optic connectors, and the cleaning and handling of installed connectors. For information on connector loss, see Connector Loss Test Measurement.

Last modified on Continue reading
0

Blog Menu

News 

  • Clearfield offers FieldSmart FxMP multi-purpose fiber panel
    Clearfield, Inc. (NASDAQ:CLFD) has unveiled the FieldSmart Fiber Crossover Multi-Purpose (FxMP) Patch Panel, a fiber distribution panel designed to enable a single unit to fit in multiple rack sizes and configurations. The FXMP enables network managers to use the same panel to route and deploy fiber jumpers throughout the network in both rack- and cabinet-style configurations.
  • ZTE back in business as Commerce technology ban suspended
    The U.S. Department of Commerce today announced it has suspended the ban it imposed on ZTE that denied the Chinese company access to U.S. technology. ZTE deposited $400 million in escrow in a U.S. bank, fulfilling the last of its financial obligations under the agreement reached June 7 through which ZTE would regain access to the technology essential to the construction and maintenance of many of its products. The company effectively shut down shortly after the ban was imposed April 16.